TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (CHANGE ENGINE AIR INTAKES) - Continued
6.
Using 9/16 inch socket, extension and ratchet,
remove six nuts and lockwashers (H) from inside intake (J).
7.
Using 9/16 inch socket, extension and ratchet, remove
eight nuts and lockwashers (K) on rim of intake (J).
NOTE
A gasket is glued to bulkhead.
8.
Carefully pull intake (J) from bulkhead.
9.
Set intake with screen end (L) out toward turret to draw
air from crew compartment.
10.
Set intake with closed end (M) in (screen toward engine)
to draw air from engine compartment.
TA132800
2-661