TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (CHANGE ENGINE AIR INTAKES) - Continued
11.
Install eight nuts and lockwashers (K) on outside rim.
12.
Using 9/16 inch socket, extension and ratchet, tighten nuts
(K).
13.
Using 9/16 inch socket, extension and ratchet, install
six nuts and lockwashers (H) on inside of intake.
14.
Using 9/16 inch socket, extension and ratchet, tighten
screws (H).
15.
Place cover (G) with gasket on intake.
16.
Install four screws and lockwashers (F) in cover.
17.
Using 1/2 inch socket and ratchet, tighten screws (F).
18.
Repeat steps 4 thru 17 for other intake.
19.
Return tools to stowage.
TA252862
2-662 Change 1
