TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (PERFORM SHALLOW WATER FORDING)- Continued
6.
Using 9/16 inch socket and ratchet, loosen two screws (E)
securing clamps (F) that hold personnel heater exhaust tube
(G) to right front fender.
7.
Go to inboard end of exhaust tube (G) using 7/16 inch
socket, ratchet, and 7/16 inch open end wrench, remove
two nuts, two screws, and four washers (H). These hold
clamp (J) and exhaust tube (G) to exhaust elbow (K).
TA252866
2-666 Change 1