TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (PERFORM DEEP WATER FORDING) - Continued
NOTE
If available, apply water to seal to help
slide seal into place.
Make sure valve stem (AG) is up and
pointing toward cupola.
31.
Push seal (AH) under lip around blower cover (AK)
with valve stem (AG) up. Valve stem must be at
cupola side of blower cover.
32.
Carefully stretch seal (AH) over blower cover (AK)
and center evenly in blower air inlet. (It may be
necessary to use screwdriver).
TA252895
Change 1 2-668-21
