TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (PERFORM DEEP WATER FORDING)- Continued
33.
Remove valve stem cap (AF).
CAUTION
Do not operate ventilator blower while
seal is in air inlet because of possible
damage to equipment.
34.
Attach hand pump (AL) (from water fording kit), to
valve stem.
35.
Inflate seal until tight in air inlet opening.
36.
Disconnect hand pump (AL) and stow in left rear
fender box.
37.
Put valve stem cap (AF) on valve stem (AG) with
deflator end out.
TA252896
2-668.22
