TM 9-2350-222-10-3
MAINTAIN PERISCOPES (INSTALL PERISCOPE BODY) - Continued
To Install M36E1 Passive Body:
Make Sure:
q MASTER BATTERY switch (A) is set to OFF.
q Cupola azimuth lock is locked (page 2-569).
1. Raise headrest (B) and (C).
2. Slide passive body (D) into head assembly (E).
3. Hold base of body (D) with one hand.
4. Engage latches (F) (one front, one rear).
5. Engage front latch (G).
NOTE
Make sure passive body (D) is secure before remov-
ing hand.
6. Remove lamp housing (G) from light source control (H).
7. Connect lamp housing (G) to sight (J).
TA252985
Change 1 3-220.3