TM 9-2350-222-10-3
MAINTAIN PERISCOPE (INSTALL PERISCOPE BODY) - Continued
To Install M36IR Body:
Make Sure:
q MASTER BATTERY switch (A) is set to OFF.
q Cupola azimuth lock is locked (page 2-569).
1.
Raise headrest (B) and (C).
2. Raise IR body (D) into head assembly (E).
3. Hold IR body (D) with one hand.
4. Hook rear latch (F) by pulling down on latch.
5. Hook front latch (G) by pushing up on latch.
6.
Make sure IR body (D) is secure before
removing hand from body.
7. Remove lamp housing (H) from light source
control (J) and connect to sight (K).