TM 9-2350-222-10-3
MAINTAIN AZIMUTH INDICATOR (ACCURACY AND SLIPPAGE CHECK) - Continued
4. Set azimuth indicator (F) to zero:
a.
Press down and hold resetter
knob (G).
b. Turn resetter knob (G) to aline
middle scale pointer (H)
with inner scale pointer (J),
c.
Depress resetter knob (G)
fully and hold.
d.
Turn resetter knob (G)
moving both pointers (H)
and (J) to zero.
NOTE
Make sure you do not traverse
past original aiming point dur-
ing following steps.
5.
Using MANUAL TRAVERSE handle
(D), traverse turret through a
complete circle. Bring aiming
cross (E) back on same aiming
point (B).
TA133079
3-249
