TM 9-2350-222-10-3
MAINTAIN AZIMUTH INDICATOR (ACCURACY AND SLIPPAGE CHECK) - Continued
NOTE
Do not traverse past original
aiming point during next step.
8. Using MANUAL TRAVERSE handle
(D), traverse turret left until cross
(E) is alined with aiming point (B).
9. Check azimuth indicator:
a. If pointer (H) is within
area shown, azimuth indicator
has not slipped.
b. If either pointer (H) or (J)
is out of area shown, notify
organizational maintenance
personnel.
10. Repeat steps 1 thru 9 in
opposite direction.
TA133083
3-253