C8, TM 9-2350-230-12
TABLE 2-1. DEPROCESSING VEHICLE
CONTINUED
STEP
PROCEDURE
FIG/ITEM
27
Missile guidance system and fire control deprocessing should be
accomplished in accordance with separate instructions issued
by appropriate agency.
NOTE. For inspection and service of missiles, refer to table 7-2
28
Remove VCI bore tube from barrel of 7. 62MM machine gun and
clean barrel with clean dry patches.
29
Disassemble, clean, lubricate, and assemble 7. 62MM machine gun.
Inspect for missing parts and proper assembly.
LO 9-2350-
230-12
30
Install flash hider on 7. 62MM machine gun.
31
Install 7. 62MM machine gun in mount and connect solenoid lead.
32 Install spent brass ejection chute extension.
33
Remove protective lubricants and coverings from sighting and
fire control equipment.
34
35
Perform all "before operation" PM checks and services table 4-1.
36
Perform the following PM checks and services table 8-17:
Sequence numbers: 7. 1, 11, 12, 13; 16 through 27; 29, 33, 35;
39 through 43; 45 through 48; 52, 59.
37
2-2.2