C6, TM 9-2350-230-12
TABLE 2-14. INFRARED SEARCHLIGHT KIT INSTALLATION (FIG. 2-34)
Mfr 's
F. S. N
Part No
Item
5855-058-1293
AN/VSS-3
Consisting of:
1 - Main Control Box w/attaching Hardware .........
5855-135-0155
C-7905/VSS-3
1 - Remote Control Box w/attaching Hardware ....
5855-135-0154
C-7906/VSS-3
12, 13,14
1 - Searchlight w/support ......................................
5855-135-0156
MX8272/VSS-3
1
1 - Cable Assembly (Searchlight-to-Roof) ............
Not Available
CX-11893/VSS-3
5
STEP
INSTALLATION PROCEDURE
WARNING:
Make certain that VEHICLE MASTER switch is turned to the OFF
position.
1
Position searchlight with support (1) onto mounting bracket (2) and secure with 3 cam
2
Remove housing cap (4) and connect searchlight-to-roof harness at each end (5).
Stow cap on threads provided on top of housing.
3
Remove and discard existing screw (6) securing clamp and roof-to-main control box
wiring harness (7).
4
Install main control box (8), clamp (7), and roof-to-main control box wiring harness (9)
and secure with 4 screws and washers (10 and 11). Connect wiring harness at main
control box.
5
Position remote control box (12) and secure with 4 screws and washers.
6
Connect main control box-to-remote control box wiring harness (15) at each end.
7
Connect main control box-to-electrical contact ring wiring harness (16) at control box.
SEARCHLIGHT LAMP REPLACEMENT
1
Remove searchlight front cover and remove spare lamp from container.
2
Place container over burned out lamp, engaging container ferrule with base of lamp.
Unscrew lamp counterclockwise and remove.
3
Place container over replacement lamp and install lamp in searchlight.
4
Remove container and install searchlight front cover.
Figure 2-35. Searchlight with support and mounting bracket.
2-58