TM 9-2350-230-12
Malfunction
Probable cause
Corrective action
TRANSMISSION - Continued
23. Steer control will not
a. Steer control linkage binding,
a. Inspect and repair or adjust
move
bent, or incorrectly
adjusted.
b. Notify support maintenance.
b. Steer valve faulty
24. Converter lockup
The lockup clutch failed
Notify support maintenance.
clutch will not
release.
25. Convertor lockup
Low governor pressure
Check piton governor
clutch will not
engage
Notify support
maintenance.
a. Adjust throttle control
26. Convertor lockup
a. Linkage out of adjustment
clutch does not
engage and re-
b. Check piton governor
lease at proper
b. Low governor pressure
speeds
If incorrect, notify
support maintenance.
a. Adjust brake linkage
27. Brakes are hard to
a. Linkage out of adjustment
operate and do not
stop vehicle
b. Adjust brake control cable
effectively
b. Brake control cable length
incorrect
c. Eliminate bind on brake-
c. Bind on brake apply lever
apply lever.
d. Adjust brake clutch (fig.
d. Brake clutch not adjusted
properly
28. Vehicle travels in
Low-range clutch failed
Notify support maintenance.
first reverse range,
(will not release).
first and second
forward range, but
stalls in any other
range. Vehicle
moves in neutral.
29. Vehicle travels in
Intermediate-range clutch
Notify support maintenance.
third forward
failed (will not release).
range and second
reverse, but stalls
in any other range.
Vehicle moves in
neutral.
8-20