C4, TM 9-2350-230-12
PRELIMINARY STEPS
1. REMOVE POWER PLANT (FIGURES 9-3 THROUGH 9-6).
2. REMOVE GENERATOR (FIGURE 9-111).
REMOVAL
1.
REMOVE NUT AND FLAT WASHER AND DISCONNECT
GROUND STRAP AT STARTER.
2.
REMOVE NUT AND FLAT WASHER AND DISCONNECT
STARTER CABLE.
3.
REMOVE SCREW AND DISCONNECT SOLENOID LEAD.
4.
REMOVE 5 SCREWS, LOCK WASHERS, AND FLAT
WASHERS AND REMOVE GENERATOR SUPPORT
CRADLE AND GENERATOR SUPPORT BRACKET AS A
COMBINED UNIT.
5.
REMOVE BOLT, 2 SCREWS AND LOCK WASHERS AND
PULL STARTER STRAIGHT OUT FROM ENGINE HOUSING.
CAUTION:
STARTER WEIGHS APPROXIMATELY 80
POUNDS, USE CARE DURING REMOVAL AND
INSTALLATION
INSTALLATION
REVERSE
REMOVAL
PROCEDURE
TO
INSTALL
ENGINE
STARTER.
C. ENGINE STARTER - INSTALLED VIEW.
WE 11112AI
Figure 9-113. (Superseded) Removal/installation - engine starter
9-119
