TM 9-2350-275-BD
ENGINE
Personnel/Time Required:
1-3 soldiers
q
q 1-3 hours
Materials/Tools:
Cleaning solvent
q
q Rags
q Hardening sealer
q Non-hardening sealer
Procedural Steps:
1. Remove power pack, if required.
2. Clean area around holes or cracks and fill them with non-hardening silicone sealant,
Permatex II, or any metal filler available.
3. If hole is too large to be filled, make a wooden peg, cover outside of peg with sealer,
and place into the hole.
