TM 9-235-275-BD
COMMUNICATIONS SYSTEM
NOTE (Cont
If the AUX receiver is to be used in the X-MODE communications hookup, it
must be opened up and its switch set to X-MODE.
The AUX receiver switch must be placed in NORMAL after you are through with
the X-MODE hook-up.
Loss of automatic channel selection if RT-246 is being used.
NOTE #10 -
Section V. Common Vehicle Cording Diagrams
11-36. GENERAL.
Cording diagrams for common U.S. vehicles on the battlefield have been
p r o v i d e d in this section to aid in identifying components and cables that are
interchangeable. These diagrams also assist in identifying cables without having to
trace them throughout the vehicle.
Cording Diagram For:
Page
KY-57 General Configuration (Unclassified)
AN/VIC-l and AN/VRC-12 in M 1 Tank
AN/VRC-46, AN/VRC-64, or two AN/GRC-160's with AN/VIC-1 in
M2 (chassis)
AN/VRC-46, AN/VRC-64 or (two) AN/GRC-160's with AN/VIC-1,
in M3 (chassis)
AN/VRC-46, AN/VRC-64 or (two) AN/GRC-160's with AN/VIC-1,
in M2 and M3 (turret)
AN/VIC-l and AN/VRC-12 in M60A1 Tank
AN/VRC-46, AN/VRC-64, or AN/GRC-160 with AN/VIC-l in M88A1
AN/VRC-46, AN/VRC-53, AN/GRC-125, AN/VRC-64, or AN/GRC-160
and AN/VIC-1 in M578
AN/VIC-l in M 113 and M577
AN/VRC-12 in M 113 Family
AN/GRC-160 and AN/VIC-1 in Improved Tow Vehicle M901
