TM 9-2350-277-10
INSTALL/REMOVE AN/VAS-5 DRIVER'S VISION ENHANCER (DVE)
0035 01
(M58 ONLY) -- Continued
Hold driver's vision enhancer in an upright position with the window pointing forward and push entrance window
5.
carefully through mounting plate in driver's hatch.
6.
Engage cleats of driver's vision enhancer into retainers of mounting plate on driver's hatch.
7.
Push driver's vision enhancer upward and firmly until driver's vision enhancer fully engages mounting plate retainers.
8.
Check for secure mounting by simultaneously twisting and pulling down on driver's vision enhancer.
9.
Check for free rotation of driver's vision enhancer and that azimuth control operates freely and correctly.
10. Ensure DRIVER'S VISION ENHANCER POWER switch is in OFF position.
11. Connect vision power cable plug to power receptacle on panel.
0035 01-3
Change 4
