TM 9-2350-277-10
INSTALL/REMOVE AN/VAS-5 DRIVER'S VISION ENHANCER (DVE)
0035 01
(M58 ONLY) -- Continued
REMOVAL
1.
Turn POWER switch to OFF.
2.
Disconnect vision power cable from power receptacle on panel.
3.
Rotate driver's vision enhancer to straight-ahead azimuth lock position and secure azimuth locking knob.
4.
Hold driver's vision enhancer firmly, while pressing two retainer latch handles upward.
Carefully lower driver's vision enhancer from retainers and mounting plate in driver's hatch.
5.
Carefully wipe off any dirt or moisture from driver's vision enhancer.
6.
Remove strap assembly and plug from stowage bracket.
7.
Change 4
