TM 9-2350-277-10
OPERATE AN/VAS-5 DRIVER'S VISION ENHANCER (DVE) (M58 ONLY) -- Continued
0035 02
SHUTDOWN
1.
Refer to the following steps for shutdown procedures:
a.
Unstow the driver's display and commander's display as required, by pulling display adjustment knobs out and
positioning display in the viewing position.
b.
Set SENSOR LEVEL and GAIN controls to full counterclockwise (AUTO) detent position.
c.
With the DISPLAY BRIGHTNESS control turned fully counterclockwise, rotate the knob approximately 1/4 turn
clockwise.
d.
Set POLARITY switch to WHT-HOT (up position).
e.
Set VIDEO switch to SENSOR (up position).
f.
Set POWER switch to OFF (down position).
END OF TASK
Change 4
