TM 9-2350-277-10
REMOVE/INSTALL T130 TRACK SHOE -- Continued
0093 00
4.
Drive track pin all the way out. Wear industrial goggles. Use hammer and long end of drive pin punch.
CAUTION
Oil or grease will destroy the rubber bushings in track shoes over time. Do not coat track pin
with oil or grease.
5.
Install nut flush on track pin. Use 1/2 inch drive socket handle and 11/16 inch socket.
6.
Place track shoe in lower part of track. Align track pin holes.
7.
Obtain 20 degree angle between track shoes to be connected.
0093 00-6
Change 4