TM 9-2350-277-10
CHECK/REPLACE MISSING PLUG (M113A3 ONLY)
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Maintenance Level
Personnel Required
Operator
Soldier
Tools and Special Tools
Equipment Condition
Materials/Parts
REMOVAL
NOTE
Armor mounting provision holes must be free of dust and dirt before plugs are installed.
1.
Remove plug from armor mounting provision hole. Use flat tip screwdriver.
2.
Clean armor mounting provision hole. If necessary, use cleaning compound solvent. Let surface air dry.
INSTALLATION
1.
Install new plug in armor mounting provision hole. Use flat tip screwdriver.
END OF TASK