TM 9-2590-209-14&P
NOTE
(b) Remove and clean oil filters (para 5-5
Control lever must remain in H (hold) position during this
and fig 9-25).
process.
______________________________________________
Section XV. INSTALLATION OF RESERVOIR VENT LINE
e. Install assembled components to bracket
9-39. General. This section provides instructions for
on reservoir so that nipple on filter projects through
the installation of the reservoir vent line.
slotted hole in bracket; secure with nut MS35691-45. Do
not tighten.
NOTE
f.
Align slotted holes in bracket 12257379 with
Only vehicles having a top loading air
threaded holes in reservoir bracket, and install two
cleaner can accept the M9 bulldozer kit.
screws M890728-4, lockwashers MS35338-44, and
The air breather parts (reservoir vent
washers MS27183-10.
line) installation is not compatible with
the side loading air cleaner.
g. Remove plug in center of reservoir cover,
and discard.
9-40.
Reservoir Vent Line (Fig 9-26).
h. Apply sealing compound per specification
a. Apply sealing compound per specification
MIL-S-45180, Type m to elbow 12257378, and install in
MIL-S-45180, Type III to threads of elbow MS51815-37,
reservoir cover.
and install elbow in air cleaner box.
I.
Apply sealing compound per specification
b. Install hose assembly MS28762-60740 to
MIL-S-45180, Type III to adapter MS51819-37, and
elbow, and secure to side of air cleaner box with four
install to elbow.
clamps MS21333-126 using existing screws.
j.
Install tube assembly 12257381 between
c. Place clamp MS21333-126 on hose
elbow and filter. Start tube nuts on both ends; then align
assembly, and install on welded plate with screw
tube and filter so that tube assembly rests on reservoir
MS90728-57, lockwasher MS35338-46, and washer
cover. Tighten all nuts and screws on tube and filter.
MS27183-14. Do not tighten.
k. Install hose assembly MS28762-60740 to
d. Install nipple MS51812-25 with packing
other end of filter, and tighten hose and clamps
MS828778-6 on each end of filter AN6240-1. Install filter
previously left loose.
to bracket 12257379 with nut MS35691-45 so that arrow
on filter points toward bracket. Do not tighten.
___________________________________________
9-34
