TM 9-2590-209-14&P
Table 10-2. Operator/Crew Preventive Maintenance Checks and Services.- Continued
NOTE: Within designated interval, these checks are to be performed in the order listed.
B - Before
A - After
M - Monthly
D - During
W - Weekly
Procedures
Equipment will be
Item
Interval
Item to be
Check for and have repaired
reported Not Ready
No.
B
D
AW
Inspected
or adjusted as necessary
(Red) if:
3
HEADLAMP
Inspect headlamp adapters
ADAPTERS
for damage and locknuts for
tightness.
4
MOLDBOARD
Check that moldboard carrying
CARRYING
hooks are not cracked or
HOOKS AND
broken. Check that carrying
HANDLE
hooks operating handle is
not bent or broken.
5
HYDRAULIC
Check in area of left and
Class III oil
CYLINDERS
right hydraulic cylinders
leak. Cylinder
for oil leaks. Check that
rod bent or
cylinder rod is not bent or
broken.
broken.
6
TILT ARMS
Check that left and right
tilt arms are not cracked
or broken.
7
PUSHBEAMS
Check that left and right
pushbeams are not cracked
or broken.
8
MOLDBOARD
Check moldboard for cracks
BLADE
and loose or missing
hardware.
9
MOLDBOARD
Check cutting edge for
Cutting edge
CUTTING
cracks, breaks, and
cracked or
EDGE
missing hardware.
broken.
10
EMERGENCY
Check for kinked, frayed,
LIFT CABLES
broken, or missing lift cable.
Check cable for loose or
missing hardware.
10-11
