Code
Explanation
Code
Explanation
economically repairable at DSU and GSU activities and
"X 1"
Repair parts which re not procured or stocked.
normally re furnished by supply on an exchange basis.
The requirement for such items will be filed by
'T"
High dollar value recoverable repair parts which
use of the next higher assembly or component
are subject to special handling and are issued
"X2" Repair parts which are not stocked. The
on an exchange basis.
Such repair parts
indicated maintenance category requiring such
normally re repaired or overhauled at depot
repair parts will attempt to obtain same through
maintenance activities.
cannibalization. Where such repair parts are
"U"
Repair parts specially selected for salvage by
not
obtainable
through
cannibalization,
reclamation units because-e of precious metal
requirements will be requisitioned, with
content, critical materials, or high dollar value
accompanying justification, through nor supply
reusable casing or casting.
channels.
"S"
Repair parts and assemblies which
re
"C"
Repair parts authorized for local procurement
economically repairable at DSU and GSU
Where such repair parts are not obtainable
activities and normally re furnished on an
from local procurement, requirements will be
exchange basis.
When determined to be
requisitioned through normal supply channels
uneconomically repairable by, DSU and GSU
accompanied by a supporting statement of non-
activities, they will be returned to the depot for
availability from local procurement.
evaluation and analysis
prior to final
"G"
Major assemblies that re procured with PEMA
disposition.
funds for initial issue only as exchange
"E"
Repair parts which are expendable.
assemblies at DSU and GSU level. These
"N"
Item other than repair parts which
re
assemblies will not be stocked above DS and/or
determined to be Nonexpendable.
returned to depot supply level
"X"
Any item not coded R, T, U, S, N, and E above
(2) Maintenance code; indicates the lowest
to indicate the item is expendable.
category of maintenance authorized to install the listed
b. Federal Stock Number Column 2. This column
item. The maintenance level odes are: explanation
Explanation
indicates the Federal stock number assigned to the
item and will be used for requisitioning purposes.
"C"
Crew or operator maintenance.
c. Description Column 3. This column indicates
"O"
Organizational maintenance.
the Federal item name and any additional description of
the item required. A part number or other reference
"F"
Direct support maintenance.
number is preceded by the applicable five-digit Federal
supply code for manufacturers in parentheses. All
"H"
General support maintenance.
reference numbers that are not preceded by a Federal
supply code re to be coated as 19207 items (Army
"D"
Depot maintenance.
Tank-Automotive Command, Warren, Michigan).
Repair part quantities included in kits, sets, and
(3)
Recoverability
code;
indicate
whether
assemblies are shown in front of the repair part name.
unserviceable items should be returned for recovery or
Materiel required for manufacture or fabrication is
salvage.
Items not coded are expendable.
identified.
Recoverability codes are:
d. Unit of Measure Column 4. A 2-character
Code
Explanation
alphabetic abbreviation indicating the amount or
"R"
Repair parts and assemblies which are
quantity of the item upon which the allowances are
based, e.g., ft. e., pr., etc.
AD-2
