TM 9-2590-506-13&P
5-15. FUEL PRESSURE ADAPTOR MAINTENANCE INSTRUCTIONS
This task covers:
a. Removal
d. Repair
b. Cleaning
e. Installation
c. Inspection
INITIAL SETUP
Tools, Special Tools and Test Equipment
Personnel Required
Cross Tip Screwdriver No. 2
One
Torque Wrench, 1/4-inch drive, 50 pound-inches
Condition Description
Pressure Cap Removed (para 5-14a)
No. 2 Cross Tip Adapter, 1/4-inch drive
Special Environmental Conditions
Materials/Parts
None
Fuel Press Adaptor Packing
a. Removal.
(1) Remove six screws (1) from fuel pressure
adaptor plate (2) and separate fuel
pressure adaptor from adaptor plate (3).
(2) Remove and discard fuel pressure
adaptor packing (4) from fuel pressure
adaptor (2).
b. Cleaning.
Clean fuel
press
adaptor
as
instructed in para 5-9.
c. Inspection.
Inspect fuel press adaptor for
evidence of wear or damage.
d. Repair. Repair is limited to replacement of fuel
press adaptor.
5-19
