TM 9-4110-246-14
TO 40R7-5-10-1
3-24. REMOVE/INSTALLATION LATCH STRIKE.
TOOLS: Screwdriver, Flat Tip
REMOVAL
1. Remove screws (1) to loosen strike.
2. Remove strike (2) from door frame panel assembly.
INSTALLATION
1. Position strike (2) on external side of door frame panel assembly.
2. Insert screws (1) through strike and into door frame panel assembly. Do not tighten.
3. Close door to ensure that latch engages properly.
4. Tighten screws (1).
5. Check gasket around walk-in door to be sure it is sealing properly.
3-27
