TM 9-4110-246-14
TO 40R7-5-10-1
3-27. REMOVE/INSTALL DOOR GASKET.
TOOLS: Staple Puller or Screwdriver, Flat Tip
Pocket Knife
Staple Gun
SUPPLIES: Gasket
Staples
REMOVAL
1. Use screwdriver or staple puller to remove staples (1).
2. Remove and discard damaged gasket (2).
INSTALLATION
1. Begin installing new gasket on the bottom, hinge side, of the door using staple gun to mount the gasket.
2. Gasket must be installed as a continuous strip around door and end at the bottom, hinge side, of the oor. Cut
d
excess after tacking end into place.
3-31