TM 9-4110-246-14
TO 40R7-5-10-1
3-38. REMOVE/INSTALL SWITCH AND SWITCH COVER.
TOOLS: Screwdriver, Flat Tip
REMOVAL
WARNING
The lighting circuit operates on 125V ac. Disconnect power to power receptacle
before beginning this procedure. Failure to heed this warning may result in death
or injury.
1. Remove screws (1) with screwdriver and remove switch cover (2).
2. Remove screws (3) and gently pull switch (4) away from door frame panel assembly.
3. Tag and disconnect wires (5) from switch.
INSTALLATION
1. Connect wires (5) to switch as tagged and remove wire tags.
2. Position switch (4) into door frame panel assembly and secure with screws (1).
3. Install switch cover (2) using two screws (1). Tighten screws with screwdriver.
4. Reconnect power to power receptacle.
3-44
