TM 9-4110-254-14
4-5.
SERVICE UPON RECEIPT OF MATERIAL.
a. Inspect the equipment for damage incurred during shipment If the equipment has been damaged, report the
damage on SF 364, Report of Discrepancy.
b. Check the equipment against the packing slip to see if the shipment is complete. Report all discrepancies in
accordance with the instructions of DA Pam 738-750.
4-6.
INSTALLATION INSTRUCTIONS.
a. Tools and Equipment. Tools required to install the refrigeration unit include a wrench for tightening the mounting
hardware and a fork lift or similar lifting device.
b. Refrigerator Enclosure Preparation. The refrigerator enclosure must have an opening 30.50 in (77.47 cm) wide
and 28.00 m. (71.12 cm) high (fig. 4-1) to insert the refrigeration unit. If an opening does not already exist in the
enclosure, see the enclosure manual for information on making such an opening.
Figure 4-1. Wall Opening Dimensions
4-2