TM 9-4110-254-14
4-53. HEAT SHIELD GASKETS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts:
General Safety Instructions
Silicone RTV
WARNING
Gaskets (2)
High voltage and exposed rotating parts are
Gaskets (2)
used m the refrigeration unit Personal injury
can result if power is connected
Equipment Conditions
disconnected
a. Removal.
(1)
Remove eight screws (1), two gasket retainer strips (2), and top gasket (3) Repeat for bottom gasket.
(2)
Remove eight screws (4), two gasket retainer strip (5), and left side gasket (6) Repeat for right side
gasket.
b. Installation.
(1)
Coat the cut surfaces of two each gaskets (3) and (6) with silicone RTV to seal foam
(2)
Install right side gasket (6), two gasket retainer strips (5), and eight screws (4). Repeat for right side
(3)
Install top gasket (3), two retainer strips (2), and eight screws (1). Repeat for bottom gasket
(4)
Seal four seams (7) with silicone RTV
4-111