TM 9-4110-254-14
Figure 5-13. Receiver
b. Installation.
(1) Lightly coat fusible plug (8) copper gasket with compressor oil.
(2) Install fusible plug (8) and tighten to between 25 and 30 ft lb (33.9 and 40.68 Nm).
NOTE
Be sure to observe flow direction noted during removal.
(3) Install receiver (7), flat washer (6), and new self locking nut (5).
(4) Install flat washers (4), bolt (3), flat washer (2), and new self locking nut (1).
NOTE
FOLLOW-ON MAINTENANCE:
Install isolation valves (para 5-16).
Replace dehydrator (para 5-14).
Leak check (para 5-10), evacuate (para 5-11), and charge (para 5-12) the refrigeration system.
Close right side door.
5-37
