TM 9-4110-254-14
5-18. CONDENSER COIL REPLACEMENT.
This task covers:
a. Removal
b Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Self Locking Nuts (6)
Lock Washers (6)
Both side doors open.
a. Removal.
(1) Remove six bolts (1), lock washers (2), and clamps (3). Discard lock washers.
WARNING
Coil fins are sharp and can cut hands or fingers Wear gloves to prevent personal injury when handling coil.
(3) Remove six self locking nuts (6), bolts (7), flat washers (8), and condenser coil (5) Discard self locking nuts.
(4) Remove condenser shroud (9).
b. Installation.
(1) Install condenser shroud (9).
WARNING
Coil fins are sharp and can cut hands or fingers. Wear gloves to prevent personal injury when handling coil.
(2) Aline condenser coil (5) with shroud (9), and install six flat washers (8), bolts (7), and new self locking nuts (6).
5-38