TM 9-4110-255-14
Table 4-1. Unit Preventive Maintenance Checks and Services for Model F5000RD - Continued
Location
Item No.
Interval
Procedure
Not Fully Mission Capable If:
Item to
Check/
Service
8
200 Hours
Engine Rocker Service the rocker arm by checking the clearance
arm
between the rocker arm and valve and adjusting
if necessary.
a.
Notify direct support maintenance to check
and adjust the rocker arm to valve clearance
as necessary.
b.
Close front door and both side doors.
c.
Connect battery (para 4-35) and put unit back
into service.
9
500 Hours
Injector
Service the injector nozzles by removing,
Injector nozzles clogged.
Nozzles
cleaning, and testing them.
Notify direct support
maintenance to clean and test the injector nozzles.
10
500 Hours
Injection
Service the injection pumps by testing and
Injection pumps out of
Pumps
adjusting the injection timing. Notify direct
time.
support maintenance to test and adjust the
injection pumps.
11
2500
Cylinder Head Service the valve seats by removing the cylinder
Hours
Valve Seats
head and testing them for air leaks.
Notify direct
support maintenance to remove the cylinder head
and test the valve seats.
12
5000
Engine
The engine must be replaced with a new or
Hours
rebuilt engine.
Replace engine (para 4-61).
Refrigeration
Unit Exterior
13
Monthly
Doors/Cover
Service the doors, guard, and cover by lubricating
the hinges (fig. 4-6).
a.
Apply lubricating oil (MIL-L-2104) sparingly
from oil can onto the hinge moving joint
surfaces.
b.
Wipe away excess lubricating oil with a clean
rag.
14
Monthly
Barrel Bolts
Service the barrel bolts by lubricating them
a.
Apply lubricating oil (MIL-L-2104) sparingly
from oil can onto the barrel bolt moving joint
surfaces.
b.
Wipe away excess lubricating oil with a clean
rag.
4-19
