TM 9-4110-255-14
c. Installation.
(1) Install relay mounting socket (6), two screws (11), and new self locking nuts (10).
NOTE
Terminal hardware is supplied with relay mounting socket.
(2) Using tags and wiring diagram (fig. 1-4), install wire leads (7), seven lock washes (9), and screws (8).
r
Remove tags.
(3) Push defrost timer (5) into relay mounting socket (6) and install new tie down strap (4).
(4) Adjust controls (para 4-8) as necessary.
(5) Close control panel (3) and install two new lock washers (2) and bolts (1).
NOTE
FOLLOW-ON MAINTENANCE:
Unlatch and close control box cover door.
Connect battery (para 4-35) and put unit back into service.
4-75
