TM 9-4110-256-14
4-21. CIRCUIT BREAKER CB1 TESTING AND REPLACEMENT. - Continued
c.
Installation.
(1)
Using tags and wiring diagram (fig. 1-4), install wire lead terminals (8), six lock washers (10), and nuts
(9). Remove tags.
(2)
Install circuit breaker cover (3), six new lock washers (6), and screws (5).
(3)
Carefully push circuit breaker cover (3) into place and install two new lock washers (2) and bolts (1).
Figure 4-16. Circuit Breaker
NOTE
FOLLOW-ON MAINTENANCE:
Close control panel cover. See para 4-16.
Connect power and put unit back into service.
4-42
