TM 9-4110-256-14
4-38.
EVAPORATOR FAN REPLACEMENT.
This task covers: a. Removal
b. Installation
INITIAL SETUP
General Safety Instructions:
Equipment Conditions:
WARNING
disconnected.
Materials / Parts:
High voltage and exposed rotating
Lock Washers (7)
parts are used in the refrigeration unit.
Personal injury can result if power is
connected
a. Removal.
(1)
Remove seven bolts (1), lock washers (2), flat washers (3), and evaporator air outlet guard (4). Discard
lock washers.
Figure 4-33. Evaporator Fan
(2)
Loosen two set screws (5).
(3)
Carefully pull evaporator fan (6) off fan drive shaft (7) and remove from evaporator housing (8).
4-81