TM9-4120-370-14
TO35E9-229-1
This does not apply to models F36T-2S, F36T4-2S, and F36T4-2SA.
Removal
a.
(1) Using screwdriver, loosen two turn lock fasteners (1/4 turn) and open condenser discharge air deflector
door.
(2) Using screwdriver, remove four screw from the two upper support brackets.
(3) Using screwdriver, remove four screws, lock washers, and flat washers from door hinge.
b. Inspection. Check that door is not bent or otherwise obviously damaged, If damaged, refer to direct support
maintenance.
Installation
c.
(1) Using screwdriver, secure door hinge to casing with four screws, lock washers, and flat washers.
(2) Using screwdriver, secure the two upper support brackets to casing with four screws.
(3) Close door.
(4) Using screwdriver, tighten two turn lock fasteners (1/4 turn).
