TM 9-4120-371-14
Section II EQUIPMENT DESCRIPTION
a. Purpose of Air Conditioner. The Air Conditioner is designed to ventilate, cool or heat, and to filter air in
rooms or enclosures.
b. Capabilities and features
(1) Provides a maximum of 18,000 BTU/HR of cooling or 12,000 BTU/HR of heating.
(2) Has two stages of heat.
(3) Provides source of filtered outside (fresh) ventilation air.
(4) Is self contained in a single cabinet that is ideally suited for van, shelter, or room installations.
(5) Operates in environmental conditions from tropic to arctic.
(6) Is fully portable.
(7) Has connection point for a CBR (chemical, biological, radiological) filter.
(8) Has alternate power input connection locations to provide for a variety of installations.
(9) Designed for lownoise level operation.
c. Special features
(1) The control panel may be removed from the unit and remote mounted.
NOTE
When control panel is remote mounted, a block off panel must be used on the air
conditioner. The block off panel must be ordered separately. Interconnecting
cables must also be fabricated. See installation instructions (para 4-7) for
additional information.
(2) A blast damper designed to close and keep contaminated air from being drawn in through the fresh
air intake after a distant nuclear blast is available for installation on this unit. See installation instructions (para
