TM 9-4120-371-14
b. Inspection
(1) Check that cover is not bent, cracked, or punctured. If damaged, refer to direct support
maintenance.
(2) Check that gasket is not torn, loose, or missing. Refer repair/replacement to direct support
maintenance.
c. Installation
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure cover to casing with five screws and flat washers and two flat head
screws.
4-21. ACCESS (SERVICE VALVES) COVER
a. Removal
(1) Using screwdriver, remove four screws and flat washers.
(2) Remove cover.
b. Inspection
(1) Check that cover is not bent, cracked, or punctured.
(2) Check that gasket is not torn, loose, or missing.
(3) Check that information plate is readable and in place.
(4) Refer all repairs to direct support maintenance.
c. Installation
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure cover to casing with four screws and flat washers.