TM 9-4120-378-14
4.24
CONTROL MODULE. - C o n t i n u e d
I
Remarks
Action
Location/Item
Removal
Continued
c.
Pull control module (6) straight out of junction
box.
Carefully pull temperature sensing line (7) and
d.
bulb through slot in bottom of junction box.
Control Module
disassembly
Remove Temperature Control switch knob (6) by
a.
loosening hex setscrew (7) and nut (8).
Remove four screws (9) attaching cover (10) to
b.
frame and slide cover (10) from module.
c.
Remove three screws (11 ) attaching frame posts
(12) that hold front (13) and back (14) plates to-
gether.
Pull front (13) and back (14) plates apart until
d.
connector posts (12) clear front (13) plate.
Remove wire ties (15) from wires as required,
e.
Control Module
Cover
Remove nicks, dents or deformation, if minor.
Repair
a.
Prime and paint as necessary.
b.
4-44
