ARMY TM 9-4120-380-14
NAVY EE-000-BA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-21
4 23
REPAIR/REPLACE - Continued
b. Gasket.
(1) Remove captive fasteners (2).
(2) Remove damaged gasket (4) from panel (1).
Acetone and Methyl-Ethyl Ketone (MEK) are flammable and their vapors can be
explosive. Repeated or prolonged skin contact or inhalation of vapors can be toxic Use a
well-ventilated area, wear gloves, and keep away from sparks or flame
(3) Clean area for new gasket, using acetone or MEK and a stiff brush.
(4) Coat surfaces of metal and gasket with adhesive Let both surfaces dry until adhesive is tacky but will not
suck to fingers
(5) Starting with an end, carefully attach gasket to metal surface. Press into firm contact all over
(6) Install captive fasteners (2)
c.
Foam.
(1) Remove damaged foam (8) from back of panel (1).
Acetone and Methyl-Ethyl Ketone (MEK) are flammable and their vapors can be
explosive Repeated or prolonged skin contact or inhalation of vapors can be toxic Use a
well-ventilated area, wear gloves, and keep away from sparks or flame
(2) Clean area for new foam, using acetone or MEK and a stiff brush
(3) Coat surfaces of metal and foam with adhesive. Let both surfaces dry until adhesive is tacky but will not stick
to fingers
(4) Starting with an end, carefully attach foam to metal surface Press into firm contact all over
4-41