ARMY TM 9-4120-380-14
NAVY EE-000-BA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-21
4.24 COMPRESSOR SECTION PANEL. This task covers removal, inspection, repair/replace and installation.
INITIAL SETUP
Tools:
Tool kit, service, refrigeration unit (Item 1, Appendix B)
Drill, electric, portable (Item 2, Appendix B)
drill set, twist (Item 3, Appendix B)
Riveter blind hand (Item 4, Appendix B)
Tool kit, rivet nut (Item 5, Appendix B)
Gloves, chemical (Appendix C)
Goggles, industrial (Appendix C)
Personnel: 1
Materials:
Adhesive (Item 1, Appendix E)
Bulk gasket material (see RPSTL)
Bulk foam material (see RPSTL)
Rags (Item 7, Appendix E)
Methyl-ethyl ketone (Item 8, Appendix E)
Equipment Conditions:
Disconnect input power to the air conditioner before performing any internal
maintenance. Voltages used can KILL. Shutting the unit off at the control panel does not
disconnect unit power.
(1) Disconnect air conditioner input power at source; and
(2) Remove condenser fan section panel (paragraph 4.23).
REMOVAL
a.
Loosen four captive fasteners (2) (see fig. 4-15).
b
Remove panel (3)
INSPECTION
a
Check that panel (3) is not bent, cracked or punctured.
b
Check that foam (1), foam gasket (11), or sponge gasket (7) are not torn, loose or missing.
c
Check that captive fasteners (2), rivets (4), or gasket retainers (6) are not damaged or missing.
4-43
