ARMY TM 9-4120-380-14
NAVY EE-000-BA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-21
4.51
CONDENSER MOTOR(B3).Continued.
INSTALLATION
NOTE
When replacement of the motor is necessary, perform the following: Install insulator bushing (3) Cut wire leads to 5
inches Strip and crimp wires together (see fig. FO-2.).
a.
Fungus proof motor (1) per MIL-V-173.
b. Apply corrosion inhibiting compound to both ends of shaft (2).
c.
Position motor (1).
d. Install condenser fan and housing assembly to motor (paragraph 4 50).
e. Install condenser motor and housing assembly (paragraph 4 49).
FOLLOW ON PROCEDURES
a. Install condenser fan section panel (paragraph 4.23).
b. Connect air conditioner input power at source.
Figure 4-41. Condenser Motor (B3)
4-111
