ARMY TM 9-4120-380-14
NAVY EE-000-BA-MMA-010 7053-AC
AIR FORCE TO 35E9-136-21
5.34 DAMPER ACTUATOR CONNECTING LINK. - Continued
REMOVAL - Continued
e.
Loosen screw (1) and remove damper operator (2).
f.
Remove locknut (7), flat washer (6). and actuator connector swivel (8).
g.
Remove locknut (11), flat washer (10), and damper operator swivel (9).
REPAIR
Repair consists of replacing damper operator (2), damper rod (4), and connector swivels (8) and (9).
INSTALLATION
a.
Install connector swivel (9) with flat washer (10) and locknut (11) to damper operator (2).
b.
install damper operator (2) and tighten bolt (1).
c.
Install control rod (4) to swivels (8) and (9).
d.
Tighten screw (5) to solenoid connector swivel (8).
e.
Tighten screw (3) to damper connector swivel (9).
f.
Install actuator connector swivel (8) with flat washer (6) and locknut (7) to damper actuator bracket (12).
g.
Install damper actuator (paragraph 5.33).
h.
Adjust damper connecting link.
FOLLOW ON PROCEDURES
a.
Install condenser motor and housing assembly (paragraph 4.49).
b.
Install condenser fan section panel (paragraph 4.23).
c.
Connect air conditioner input power at source.
5-83
