TM 9-4120-388-14
4-66. CONDENSATE TRAPS.
This task consists of:
a. Removal
b. Inspection
c. Cleaning
d. Installation
INITIAL SET-UP:
Equipment Condition
Junction box removed (4-46).
Mist eliminator removed (4-35).
Disconnect input power to the air conditioner before performing any internal
maintenance. Voltages used can KILL Shutting the unit off at the control panel
does not disconnect unit power.
a Removal.
(1) Disengage drain connection tubes from spring retainers on casing sides.
(2) Loosen top hose damps on drain hoses.
(3) Slip hoses down and off of casing drain tubes.
(4) Remove cotter pins.
(5) Remove springs and balls from drain ends.
4-124
