4-19. SIDE DOOR ASSEMBLIES.
This task covers:
a. Removal
b. Services
c. Installation
INITIAL SETUP:
Tools:
Tool Kit, service, refrigeration unit
Equipment Conditions:
Power off at power source.
General Safety Instructions'
Disconnect input power to the unit before performing any internal maintenance.
Voltages used can kill. Shutting the unit off at the thermostat does not disconnect
unit power.
a.
Removal. Remove the side door assemblies (1, Figure 4-15) by removing the one screw (2) on each,
lifting the doors from the bottom, and pulling down and away from the air conditioner.
b.
Service Spray water to remove any dust on the screens of the side door assemblies (1).
c.
Installation. Install the side door assemblies (1) by slipping the upper lip into the top of the opening,
closing the door, and securing with one screw (2) each.
Figure 4-15. Side Door Assemblies
4-26
