TM 9-4120-395-14&P
4-39. INDOOR FANS MOTOR BRACKET- Continued.
c.
Installation.
CAUTION
Motor oiler must be up and rotation arrow must appear as shown in Figure 4-35.
Mounting the motor any other way could cause damage to the motor.
(1)
Install the fan motor (2) on the fan motor bracket (1) and secure with the motor clamps (12) and four screws
(11).
(2)
Slide the indoor fans (7) onto the indoor fan motor (2) shaft.
(3)
Secure both Indoor fans to the fan motor bracket with the six screws (10).
(4)
Secure the left indoor fan to the front and rear brackets (9) with the four screws (8).
(5)
Align the shaft of the fan motor so that the flat spots on the shaft are below the 5/16 set bolts (6) and tighten
the 5/16 set bolt.
(6)
Slide the indoor fan assembly into the air conditioner and secure with the five screws (3).
(7)
Use silicone to seal any gaps where the top of the fans meet the drain pan assembly. See Figure 1-2. Con-
nect the wires as tagged and remove the tags.
(8)
Install control box cover (para 4-23) and both front door assemblies (para 4-17).
Figure 4-35. INDOOR FANS MOTOR BRACKET
4-66
