TM 9-4120-395-14&P
b. Installation.
(1) Slide the indoor coil (7) into the unit so that it is sitting on the rack.
(2) Slide the indoor coil clips (4) into both sides of the coil (7) so that it is secured.
(4) Replace the drier. See para 5-12.
(5) Leak test the system. See para 58.
(6) Evacuate and charge the system. See para 5-9 and 5-10.
(7) Install the access door (5) and secure it with two screws (6).
(8) Slide the top panel (2) down and secure with the four screws (1).
(9) Secure the indoor coil clips (4) with the two screws (3).
(10) Install both front door assemblies. See para 4-17.
5-27
