TM 9-4120-398-14
4-31. EVAPORATOR BLOWER MOTOR (cont)
(8) Remove mounting bracket (6) by removing four bolts (16), lockwashers (9), and washers (8).
Installation.
c.
(1) Secure mounting bracket (6) with four bolts (16), lockwashers (9), and washers (8).
(2) Install motor (12) in unit.
(3) Connect wires.
(4) Secure cover (15) with screw (14).
(5) Rotate motor (12) into position and secure to top of mounting bracket (6) with two bolts (3), lockwashers (4)
and washers (5).
Secure adjusting bolt (11) with bolt (7), washer (8), handwasher (9) and nut (10).
(6)
Attach motor pulley (1) and tighten setserew (2).
(7)
Install belt. (See paragraph 4-33.)
(8)
Install evaporator access panel. (See paragraph 4-12.)
(9)
(10) Close evaporator access door.
