TM 9-4120-398-14
4-35. HEATING ELEMENT (cont)
(3) Remove the screw (6), lockwasher (7), nut (8), and clamp (9) to the heater end support (10).
(4) Remove the heating element (5).
c. Installation.
(1) Slide clamp (9) onto end of heating element (5), and secure with screw (6), lockwasher (7), and nut (8).
(2) Install threaded end of heating element (5) into terminal box (3), and secure with hex nut (4),
(3) Secure cover (2) to terminal box (3) with four screws (1).
(4) Install evaporator access panel. (See paragraph 4-13.)
(5) Close evaporator access door.
