TM 9-4120-399-14
Section Ill. OPERATOR MAINTENANCE PROCEDURES
3-3. General. This
section contains all of the
operator maintenance procedures authorized by
the Maintenance Allocation Chart contained in Appendix B of this technical manual.
a. Removal.
(1) Remove four screws (1), four flat washers (2), and cover (3).
(2) Remove four screws (4) and cover (5).
(3) Remove four screws (6) and cover (7).
(4) Remove four screws (8), four lock washers (9), four flat washers (10), and cover (11).
b. Installation.
(1) Install cover (11), four flat washers (10), four lock washers (9), and four screws (8).
(2) Install cover (7) and four screws (6).
(3) Install cover (5) and four screws (4).
(4) Install cover (3), four flat washers (2), and four screws (1).